Convex® GearWrap™

GearWrap Sticks to Helmets,
& Electronics.• Vinyl that conforms to complex curves
• GearWrap Adhesive sticks to plastics/metals

Convex GearWrap’s adhesive is designed for high-energy surfaces such as helmets and is cleanly removable for up to one year, which makes refurbishing easier.

The adhesive is a high-performance clear (initially repositionable) permanent pressure sensitive adhesive that is ideal for enamel painted surfaces, glass, stainless steel, aluminum, copper, vinyl and ABS plastics.

Most Conformable	Tough	Thickest

4 mil Convex GearWrap with 4 mil Convex Laminate USE FOR: Mini-helmets, Electronics, and Gear	4 mil Convex GearWrap with 8 mil Convex Laminate USE FOR: Higher Durability but Conformable	8 mil Convex GearWrap with 8 mil Convex Laminate USE FOR: 18 mil, most durable for Helmets

Recommended Overlaminates

Convex Laminate: Use Convex Laminates when you need to apply graphics to complex curves such as Helmets and ATV fenders.		Pro-Shield Laminate: Thick, durable laminates that are flexible but not as conformable as Convex laminates without heating them with a heat gun.


Stubbl is a heavily textured 18 mil thick laminate designed for applications where you need more traction or grip in certain areas.		Armalex Laminate Industrial strength durability. Scuff and scratch resistant. Resistant to cleaning agents and petrochemicals.

Recommended Application Techniques:On curved surfaces such as helmets, apply by rubbing from the center out. When Convex Laminate is separated from the liner it is unsupported and can stretch during the laminating process. If there is too much reverse tension applied on the supply roll it will stretch and curl up immediately when it is cut. Laminate with a cold pressure sensitive laminator or by hand.

All of the descriptive information listed above is our recommendation only. This information does not suggest or constitute a written or verbal warranty or guaranty of any kind by the manufacturer or distributor of this product. Purchasers of this product shall be responsible for independently determining the suitability of the material for the intended application.

DEI/GMS0904 GRAPHIC MARKING SYSTEMS